Hey there, I have a montech 95 Pro Case with built in fans and the X870 MSI MAG Tomahawk WiFi motherboard. I can control the RAM, keyboard, mouse, and GPU ,however, it will not allow me to change the Montech fans. It recognizes the motherboard but I can do anything beyond selecting the sub-devices on it. I tried the hold function on the case that should allow motherboard control and it won’t even pulse for the device recognition. Am I doing something wrong? I can control the lights by using the button on the case with preset colors. Thanks for any help!
Would love for this to get support.
x870 boards are not supported as of yet. I have this same board and ran into this issue. Not sure if there is a roadmap for signalrgb that we can track supported devices
You are going to want to get a Nollie 16 5V RGB Hub, as the hub used for the Montech King 95 Pro is not supported and basically just acts as a splitter. This is what I did for my Montech King 95 Pro Case, and it works great. You will have to plug in all your fans, and make sure you plug them in numerical order on the Nollie. They sell a Nollie 8 if you don’t need the 16, but if you have 9 fans and want to control their RGB individually, then you will want to get the 16. And you can leave the plugs that power the fans plugged into the Montech Hub. My specs are the Montech Case, 9800x3d CPU, Asrock x870e Nova, 32gb T-Force Delta ram, Asrock 7900XTX GPU, RGB Support Bracket, Artic Liquid Freezer III 360 AIO, 1TB storage, and I added a 8" LCD Screen to show through the front glass (videos from Wallpaper Engine). What is not supported is my Redragon Keyboard (though the last update says it is), and my Redragon mouse. I believe I found the Nollie 16 on eBay for $25.74 (tax added $27.26), free shipping. It is coming from China, it may take a week or two to arrive.
Any Update, I’d love to see support for this board and case