# Not working with Kingston Fury

**URL:** <https://forum.signalrgb.com/t/not-working-with-kingston-fury/10064>\
**Category:** Support\
**Created:** [August 24, 2026, 4:41pm UTC](https://forum.signalrgb.com/t/not-working-with-kingston-fury/10064 "2026-08-24T16:41:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![realeradrian](https://avatars.discourse-cdn.com/v4/letter/r/d6d6ee/32.png) [@realeradrian](https://forum.signalrgb.com/u/realeradrian)\
**Post date:** [August 24, 2026, 4:41pm UTC](https://forum.signalrgb.com/t/not-working-with-kingston-fury/10064/1 "2026-08-24T16:41:41Z")

</div>

I’ve updated BIOS, I’ve used Intel Driver & Support Assistant which says there’s no updates needed, I’ve tried running as administrator, I’ve tried using OpenRGB, Kingston CTRL, I’ve reinstalled Windows, in addition to updating BIOS I also reset it to factory settings, I’ve done literally everything recommended and more. Yet, when launching SignalRGB, one of my two RAM sticks freezes colors and the other just continues to cycle colors as if nothing happened. Please help.

---

<div class="post-metadata">

**Author:** ![Benny](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.signalrgb.com/benny/32/1893_2.png) [@Benny](https://forum.signalrgb.com/u/Benny)\
**Post date:** [August 24, 2026, 5:46pm UTC](https://forum.signalrgb.com/t/not-working-with-kingston-fury/10064/2 "2026-08-24T17:46:13Z")

</div>

Try a [full power cycle](https://docs.signalrgb.com/troubleshooting/hardware-drivers/full-power-cycle/) first. Then, make sure Kingston FURY Control isn’t running, click the stuck RAM in the device list, disable it, then re-enable it. If it’s still stuck, try to reseat it.