# Issues adding fans on an GIGABYTE Motherboard, with MSI ARGB FANS **URL:** \ **Category:** Support\ **Tags:** troubleshooting, issues, rgb, argb\ **Created:** [March 24, 2026, 2:30pm UTC](https://forum.signalrgb.com/t/issues-adding-fans-on-an-gigabyte-motherboard-with-msi-argb-fans/9511 "2026-03-24T14:30:56Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Dragonborn921](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.signalrgb.com/dragonborn921/32/1901_2.png) [@Dragonborn921](https://forum.signalrgb.com/u/Dragonborn921)\ **Post date:** [March 24, 2026, 2:30pm UTC](https://forum.signalrgb.com/t/issues-adding-fans-on-an-gigabyte-motherboard-with-msi-argb-fans/9511/1 "2026-03-24T14:30:56Z")
HI! I’m using the MSI MAG PANO included hub for all case fans & MAG A15 cooler, connected to a single MB header. Tutorials show “CHANNELS” to control fans individually, but I only see “ARGB” and can’t select them. The lighting doesn’t flow in order; it jumps and lights up many LEDs at once randomly. Is the hub/single header the cause of this? How can I fix the sequence? Video: [https://www.youtube.com/watch?v=71Iw-yLLBZU](https://www.youtube.com/watch?v=71Iw-yLLBZU) Thanks! ---
**Author:** ![SignalBadger](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.signalrgb.com/signalbadger/32/1654_2.png) [@SignalBadger](https://forum.signalrgb.com/u/SignalBadger)\ **Post date:** [March 24, 2026, 4:27pm UTC](https://forum.signalrgb.com/t/issues-adding-fans-on-an-gigabyte-motherboard-with-msi-argb-fans/9511/2 "2026-03-24T16:27:57Z")
That’s likely a case hub, sometimes you can change the mode by holding down a button on the controller. It varies though from case to case. I’d try plugging a fan in directly to the ARGB header of the mobo and testing. If that seems to work, you will probably need to explore a different dedicated RGB controller such as a [Nollie16](https://nolliergb.com/our_products/nollie-16/) or similar.