# Cradle and plug stabilizer for Airgoo 16-Port Signal RGB Controller

**URL:** <https://forum.signalrgb.com/t/cradle-and-plug-stabilizer-for-airgoo-16-port-signal-rgb-controller/9213>\
**Category:** DIY Hardware\
**Created:** [January 16, 2026, 8:19pm UTC](https://forum.signalrgb.com/t/cradle-and-plug-stabilizer-for-airgoo-16-port-signal-rgb-controller/9213 "2026-01-16T20:19:22Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![XSiveJeff](https://avatars.discourse-cdn.com/v4/letter/x/4bbf92/32.png) [@XSiveJeff](https://forum.signalrgb.com/u/XSiveJeff)\
**Post date:** [January 16, 2026, 8:19pm UTC](https://forum.signalrgb.com/t/cradle-and-plug-stabilizer-for-airgoo-16-port-signal-rgb-controller/9213/1 "2026-01-16T20:19:22Z")

</div>

I designed and 3D printed a cradle/holder for the Airgoo 16-Port Signal RGB Controller that has restraints for the cable in each channel and a snap-on locking bar for both A and B sides.

 ![20260114_111613](https://us1.discourse-cdn.com/flex015/uploads/signalrgb/original/2X/e/e628e0b7d5f521de66589b8053dc70975108d9b1.jpeg)

Shown in the picture above, the B channels have the locking bar snapped into place while the A channels do not.

If anyone is interested, please let me know.

---

<div class="post-metadata">

**Author:** ![Rentagosa](https://avatars.discourse-cdn.com/v4/letter/r/848f3c/32.png) [@Rentagosa](https://forum.signalrgb.com/u/Rentagosa)\
**Post date:** [March 2, 2026, 4:04am UTC](https://forum.signalrgb.com/t/cradle-and-plug-stabilizer-for-airgoo-16-port-signal-rgb-controller/9213/2 "2026-03-02T04:04:00Z")

</div>

Hey Jeff,  
I was JUST about to start designing this exact thing and thought I’d have a look to see if someone already did it and this is the only one I’ve seen. Can I get the .stl to print it? Or is it posted somewhere? Thanks!

---

<div class="post-metadata">

**Author:** ![XSiveJeff](https://avatars.discourse-cdn.com/v4/letter/x/4bbf92/32.png) [@XSiveJeff](https://forum.signalrgb.com/u/XSiveJeff)\
**Post date:** [March 11, 2026, 8:44pm UTC](https://forum.signalrgb.com/t/cradle-and-plug-stabilizer-for-airgoo-16-port-signal-rgb-controller/9213/3 "2026-03-11T20:44:03Z")

</div>

Sent you an email with the .stl shortly after I got the notification. Let me know if you got it ok and how it works out for you. I plan on doing a wee bit of a redesign here shortly. Was going to make the plug retainer fingers part of the locking bar to make it easier to insert into the Airgoo before locking them in place.

 ![Screenshot_11-3-2026_151019_](https://us1.discourse-cdn.com/flex015/uploads/signalrgb/original/2X/2/2704e39bced4136cd8fe22e057491f5bcebd4360.jpeg)

---

<div class="post-metadata">

**Author:** ![Rentagosa](https://avatars.discourse-cdn.com/v4/letter/r/848f3c/32.png) [@Rentagosa](https://forum.signalrgb.com/u/Rentagosa)\
**Post date:** [March 15, 2026, 12:15pm UTC](https://forum.signalrgb.com/t/cradle-and-plug-stabilizer-for-airgoo-16-port-signal-rgb-controller/9213/4 "2026-03-15T12:15:05Z")

</div>

Appreciate it! I didn’t receive the email; or at least I can’t find it. Maybe I’m not looking in the right place if you sent it through here. I ended up designing my own, I like the snap on brace you have on yours though…

---

<div class="post-metadata">

**Author:** ![z00mantwo](https://avatars.discourse-cdn.com/v4/letter/z/b5a626/32.png) [@z00mantwo](https://forum.signalrgb.com/u/z00mantwo)\
**Post date:** [July 16, 2026, 4:01pm UTC](https://forum.signalrgb.com/t/cradle-and-plug-stabilizer-for-airgoo-16-port-signal-rgb-controller/9213/5 "2026-07-16T16:01:41Z")

</div>

Any chance these STLs were posted anywhere?